Standard chemical process pump

Standard chemical process pump

1. Performance range of chemical pump

Flow rate: Q 1.6-1500m3/h
Head: H 5-125m
Working pressure: P less than or equal to 1.6MPa
Working temperature: t -20 ～ +150 degrees Celsius

2. Applicable industries of chemical pumps
Chlor-alkali, soda ash industry; medicine, fertilizer, pesticide; petrochemical, chemical fiber, paper industry; dye industry; environmental protection engineering and water treatment system.

3. Chemical pump structure
Horizontal rear opening door structure, the pump head and the motor are connected by a coupling, installed on the bottom plate, the impeller is rear opening, three bearings, the shaft seal adopts an external mechanical seal, a cooling device, and a bearing body
The oil level is observed with an oil glass; the structure is compact and reasonable. The pump has feet cast on the pump body, which can bear the load from the pipeline and directly transmit it to the foundation, so that the pump rotor will not bend due to the load on the pump.
So as to ensure the service life of the load bearing and mechanical seal. There is no need to open the pipeline connected to the pump body during maintenance. Just open the bolts of the bracket and the pump body and separate the two to repair the impeller.
And mechanical seal, simple and convenient.
The direction of rotation of the pump: looking at the pump from the motor end, rotate in a clockwise direction.

4. Chemical pump characteristics
This series of pumps can transport media that contains solid particles and is easy to crystallize, and is temperature-resistant, corrosion-resistant, and non-clogging. The material can be selected according to the specific working conditions.

5. Sealing type
Mechanical seal or packing seal.