CQB magnetic drive pump

1. Product overview of CQB magnetic drive pump

CQB magnetic drive pump (referred to as magnetic pump), usually consists of electric motor, magnetic coupling and corrosion-resistant centrifugal pump. Its main feature is that the magnetic coupling is used to transmit power without leakage. When the motor drives the outer magnetic steel of the magnetic coupling to rotate, the magnetic lines of force pass through the gap and the isolation sleeve and act on the inner magnetic steel to make the pump rotor rotate synchronously with the motor. , transmits torque without mechanical contact. At the power input end of the pump shaft, since the liquid is enclosed in the static isolation sleeve, there is no dynamic seal and thus there is no leakage at all.

2. Main features of CQB magnetic drive pump

CQB series magnetic pump is a new type of completely leak-free and corrosion-resistant pump developed by the national joint design group of magnetic pumps. Its technical and economic indicators are comparable to the level of similar foreign products in the late 1980s.

The type and basic parameters of CQB series magnetic pump conform to the standard of JB/T 7742-1995 "Type and Basic Parameters of Small Magnetic Drive Centrifugal Pump" and "Supplementary Regulations for Three Standards of Small Magnetic Drive Centrifugal Pump".

3. Product application of CQB magnetic drive pump

CQB series magnetic pump is suitable for petroleum, chemical, pharmaceutical, smelting, electroplating, environmental protection, food, film and television printing, water treatment, national defense and other industries. Ideal equipment for liquids. It is suitable for conveying liquids without hard particles and fibers whose suction pressure is not more than 0.2MPa, the maximum working pressure is 1.6MPa, the temperature is not more than 100℃, the density is not more than 1600kg/m3, and the viscosity is not more than 30×10-6m2/S.

4, CQB magnetic drive pump model significance

CQB series magnetic pump is suitable for petroleum, chemical, pharmaceutical, smelting, electroplating, environmental protection, food, film and television printing, water treatment, national defense and other industries. Ideal equipment for liquids. It is suitable for conveying liquids without hard particles and fibers whose suction pressure is not more than 0.2MPa, the maximum working pressure is 1.6MPa, the temperature is not more than 100℃, the density is not more than 1600kg/m3, and the viscosity is not more than 30×10-6m2/S.