The JLP type singe-stage centrifugal pulp pump and the chemical pump are for satisfy the papermaking, the system thick liquid, the water treatment
Model specification
Structure feature
1、This pump opens the door the structue after the single stage single suction cantilever,when the service does not need to disassemble the pipeline.
2、Pump inlet and oulet flange according to 1.6MPa pressure design
3、The impeller is three leaf blades or four half piece of open structure,the overflow channer enlarge,but tansports smoothly reaches as high as 6% density fine pulp ,and is suitable in includes the ration gas medium.
4、The impeller adopts precision casting and dynamic balance checking.
5、The wear-resisting board and the impeller gap may adjust through the pump body on adjuster bolt in outside, may cause between the impeller and the wear-resisting board maintains the constant gap,thus enhances the pump the use efficiency.
6、The axis seals mainly has the single end surface machine to seal adds the padding,does not need to add the cooling water the single end surface machine to seal, the padding seals the altogether three patterns,may selects according to the user demand and the actual use operating mode.
7、The impeller end uses the impeller bolt to add the lock washer fixedly,aso prevented well when pump engine off, causes the impeller bolt as a result of the impeller reverse to fall off the phenomenon,guarantees the pump the security reliable movement.